{"title":"Tesla Model Y Juniper Standard Technology \u0026 Store ","description":"\u003cp\u003eTechnology and charging accessories for the Tesla Model Y Juniper Standard: Protective cap for the DC charging port, MagSafe mounts for display, ventilation, and rear seats, as well as an electronic parking disc. Here you only see items that fit the Juniper Standard.\u003c\/p\u003e ","products":[{"product_id":"schutzkappe-dc-anschluss","title":"Protective cap for the DC connection of all Tesla models ","description":"\u003cul\u003e\n\u003cli\u003eProtects the DC port during charging\u003c\/li\u003e\n\u003cli\u003eIdeal against moisture and dirt\u003c\/li\u003e\n\u003cli\u003eDurable material\u003c\/li\u003e\n\u003cli\u003eCharging flap closes normally even with the cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eUnlike most manufacturers, who have an additional cover for the lower part of the charging port, the contacts for DC charging at Tesla are always open.\u003cbr\u003e\u003cbr\u003eTherefore, we have developed a special protective cap that safely covers the DC port during AC charging and reliably protects the contacts from moisture, dirt, and corrosion. The top of the DC protective cap has been made extra thin so that the charging flap of your Tesla can close perfectly. This way, you can charge your Tesla calmly and well-protected even in the rain.\u003c\/p\u003e ","brand":"Made4EV","offers":[{"title":"Default Title","offer_id":45674019029260,"sku":"0014","price":11.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/files\/schutzkappe-fur-den-dc-anschluss-aller-tesla-modelle-934819.jpg?v=1717151780"},{"product_id":"magsafe-ring-zum-nachrusten","title":"MagSafe rings for retrofitting","description":"\u003cul\u003e\n\u003cli\u003eSimple retrofitting\u003c\/li\u003e\n\u003cli\u003eLightweight, flat and visually appealing\u003c\/li\u003e\n\u003cli\u003eCompatible with MagSafe mounts\u003c\/li\u003e\n\u003cli\u003eSecure hold with 3M adhesive tape\u003c\/li\u003e\n\u003cli\u003eVersatile use\u003c\/li\u003e\n\u003cli\u003eSet consisting of two MagSafe rings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003edescription\u003c\/h6\u003e\n\u003cp\u003e\u003cspan\u003eEasily upgrade your devices with the practical retrofit solution, the ultra-slim and lightweight Juwua MagSafe rings, for compatibility with MagSafe mounts. With this practical accessory, you can use MagSafe technology without having to replace your devices. The ring comes with strong 3M adhesive tape that guarantees a secure and stable hold. Whether on the back of your smartphone or tablet - the ring stays reliably in place.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003ePlease note that this product is for single use only and cannot be moved or used for other devices once it has been stuck on. It is therefore important to position it carefully before sticking it on. Incorrect positioning can impair the wireless charging function of the device.\u003c\/span\u003e\u003c\/p\u003e","brand":"Jowua","offers":[{"title":"Default Title","offer_id":45674040230156,"sku":"JW-RING-MS","price":12.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/files\/magsafe-ringe-zum-nachrusten-160430.jpg?v=1717151751"},{"product_id":"elektronische-parkscheibe-needit-park-mini-schwarz","title":"Needit Park Mini Electronic Parking Disc - Black","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eDimension: LxWxH in cm : 8,2 x 2,5 x 4,5\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eKBA approval (ECE approval no. 10 R - 047203)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTested in the range: -20°C \/ +75°C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eMaterials: Housing, device: ABS; Display: GLASS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBattery: Type: CR-2450 - 3 Volt \/ service life approx. 3 years\u003c\/li\u003e\n\u003cli\u003eClock reaction time parking mode: approx. 20 sec.\u003c\/li\u003e\n\u003cli\u003eColor black\u003c\/li\u003e\n\u003cli\u003eSuitable for every vehicle\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned in Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e This electronic parking disk is only approved in Germany!\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003e\u003cb\u003eDescription\u003c\/b\u003e\u003c\/h6\u003e\n\u003cp\u003e\u003cspan\u003eWho hasn't been there: you park your car and forget to set the parking disk? When you get back to your car, you are annoyed by the parking ticket behind the windshield wiper. But with the PARK Mini, this is a thing of the past.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce the PARK Mini has been activated and attached to the windshield, you no longer need to worry about setting the parking disk. The PARK Mini automatically recognizes when the vehicle is parked and sets the corresponding arrival time itself.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf required, it can also be set manually in 30-minute increments, for example in the evening to set the display to the start of the parking time restriction in the morning.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe PARK Mini has been approved by the Federal Ministry of Transport, Building and Urban Development with reference to Regulation No. 219 on the design of electronic parking disks LA22\/7332.5\/7\/2007968. PARK Mini has been approved by the Federal Motor Transport Authority (ECE approval No. 10 R - 047203).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis parking meter combines a simple black design with high functionality. The PARK Mini was designed and developed in Denmark and is suitable for any vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDimensions: LxWxH in cm : 8.2 x 2.5 x 4.5\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\"\u003eNote: \u003c\/span\u003eThis electronic parking disk is only approved for use in Germany!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Needit","offers":[{"title":"Default Title","offer_id":45674055074060,"sku":"NEED-PARK-MINI-S","price":32.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/files\/92c3bb0ab809452b96216367ad4d6363db5b075160ff2edb87c5085e6204290a.webp?v=1793269119"},{"product_id":"juice-connector-adapter-ea-dk77","title":"Juice Connector Adapter Type K (DK)","description":"\u003cul\u003e\n\u003cli\u003eJUICE CONNECTOR safety adapter Type K for Denmark\u003c\/li\u003e\n\u003cli\u003eFor the JUICE BOOSTER 2 mobile charging adapter\u003c\/li\u003e\n\u003cli\u003eFor charging from Danish household sockets\u003c\/li\u003e\n\u003cli\u003ePart of the JUICE CONNECTOR system for charging across Europe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eWith the JUICE CONNECTOR safety adapters and the JUICE BOOSTER 2, you can charge your vehicle from any socket across Europe. This is the Type K adapter for Denmark.\u003c\/p\u003e\n\u003cp\u003eSimply connect the matching adapter to the JUICE BOOSTER 2 and plug it into the socket – so you stay flexible on vacation or when traveling in Denmark.\u003c\/p\u003e\n","brand":"Juice Booster","offers":[{"title":"Default Title","offer_id":45674062119180,"sku":"EA-DK77","price":59.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/files\/juice-connector-adapter-typ-k-dk-849841.jpg?v=1719293993"},{"product_id":"magsafe-autohalterung-fur-tesla-luftungsschlitze","title":"Magsafe car holder for Tesla air vents ","description":"\u003cul\u003e\n  \u003cli\u003eMade to fit the air vents of the Tesla Model 3 Highland and Model Y Juniper\u003c\/li\u003e\n  \u003cli\u003eAvailable in two versions: without charging, or with Qi2 wireless charging and active cooling\u003c\/li\u003e\n  \u003cli\u003eExtremely strong MagSafe magnets hold securely even on rough roads\u003c\/li\u003e\n  \u003cli\u003e360° rotating ball joint for flexible portrait and landscape alignment\u003c\/li\u003e\n  \u003cli\u003eNon-slip silicone surfaces protect phone, case and vehicle interior\u003c\/li\u003e\n  \u003cli\u003eCharging version: efficient 15 W Qi2 charging for compatible iPhone and Android devices\u003c\/li\u003e\n  \u003cli\u003eActive-cooling version: semiconductor cooling plate and quiet fan for an optimised charging temperature\u003c\/li\u003e\n  \u003cli\u003eVersatile mounting on the driver, centre or passenger side with clean cable management\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eThe Jowua MagSafe car mount for Tesla air vents was developed specifically for the vent slats of the Tesla Model 3 Highland and Model Y Juniper and blends seamlessly into the interior. It offers a secure, elegant and thoroughly practical way to keep your phone within reach and in clear view at all times. Thanks to the strong magnetic connection your device stays firmly in place, even on rough roads or through quick corners.\u003c\/p\u003e\n\u003cp\u003eThe adjustable 360° ball joint lets you set the viewing angle exactly as you need it. Navigation in portrait, media controls in landscape or an optimal position for driver and passenger: this Tesla phone mount gives you maximum freedom in placement. The non-slip silicone pads on mount and base add stability and protect both your phone and sensitive surfaces in the car from scratches.\u003c\/p\u003e\n\u003cp\u003eDepending on your needs you can choose between the version without charging and the premium version with Qi2 wireless charging and active cooling. The charging variant supports highly efficient wireless charging at up to 15 W for compatible MagSafe iPhones and magnetically compatible Android devices. The integrated dual cooling system with a semiconductor cooling plate and a quiet circulation fan helps to reduce the heat that builds up while charging. Charging performance stays constant and your phone stays at an optimal temperature.\u003c\/p\u003e\n\u003cp\u003eWhether on the driver's side, behind the steering wheel or on the passenger side: the Jowua MagSafe mount convinces with well-considered installation, high stability and a particularly clean look in the Tesla cockpit. For anyone who values design, function and precise vehicle compatibility, this Jowua accessory is the ideal addition to a modern Tesla interior.\u003c\/p\u003e","brand":"Jowua","offers":[{"title":"ohne Ladefunktion","offer_id":54848977305868,"sku":"JW-MAGSAFE-VENT","price":54.99,"currency_code":"EUR","in_stock":true},{"title":"mit Ladefunktion und aktiver Kühlung","offer_id":54848977338636,"sku":"JW-MAGSAFE-VENT-WIRELESS","price":69.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/files\/47fed867518259ff9c71e9ca6a13dcce3c3dcfadd754794ba6689364eb3fcc8b.webp?v=1783523246"},{"product_id":"jowua-6d-unsichtbare-klappbare-handyhalterung","title":"Jowua 6D invisible, foldable phone holder ","description":"\u003cul\u003e\n  \u003cli\u003eFoldable 6D design that integrates invisibly\u003c\/li\u003e\n  \u003cli\u003eSecure hold for your smartphone in the car\u003c\/li\u003e\n  \u003cli\u003eSpace-saving and discreetly stowed when not in use\u003c\/li\u003e\n  \u003cli\u003eAvailable with or without Qi2 wireless charging\u003c\/li\u003e\n  \u003cli\u003eHigh-quality accessory from Jowua\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eThe Jowua 6D invisible foldable phone holder combines modern design with high functionality. Thanks to its clever, discreet construction, it blends almost invisibly into the vehicle interior and is ready for use in just a few moves when needed. Your cockpit stays tidy without having to do without a practical phone holder.\u003c\/p\u003e\n\u003cp\u003eThe holder keeps your smartphone firmly in place and supports comfortable use while driving, for example for navigation or hands-free calls. Particularly practical: you can choose between a version without charging and one with integrated Qi2 wireless charging. Jowua thus offers an elegant solution for anyone who values comfort, order and high-quality accessories.\u003c\/p\u003e","brand":"Jowua","offers":[{"title":"with Qi2 wireless charging","offer_id":54859489411340,"sku":"JW-6D-PHONE-HOLDER-WIRELESS","price":74.99,"currency_code":"EUR","in_stock":true},{"title":"without charging","offer_id":54859505828108,"sku":"JW-6D-PHONE-HOLDER","price":54.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/files\/a07b147d1ae92647a83a2f40bba7248f7f9d003da67b372d83b5ca48abc48bb9.webp?v=1783520054"},{"product_id":"jowua-magsafe-handyhalterung-fur-tesla-display","title":"Jowua MagSafe phone holder for Tesla display ","description":"\u003cul\u003e\n  \u003cli\u003eCustom-fit MagSafe phone holder for Tesla Model S, 3, X, Y, and Cybertruck\u003c\/li\u003e\n  \u003cli\u003eOptional with Qi2 Wireless Charging and active cooling or without charging function\u003c\/li\u003e\n  \u003cli\u003eDual cooling system with semiconductor cooling plate and quiet fan for efficient charging\u003c\/li\u003e\n  \u003cli\u003eStrong magnetic hold for secure fit even on uneven roads\u003c\/li\u003e\n  \u003cli\u003eFlexible 6-way adjustment with extendable base, foldable metal arm, and 360° ball head\u003c\/li\u003e\n  \u003cli\u003eConcealable mounting behind the display for a tidy Tesla interior\u003c\/li\u003e\n  \u003cli\u003eNon-slip silicone surface protects the smartphone from scratches\u003c\/li\u003e\n  \u003cli\u003eSuction cup with pressure lock, residue-free removable and reusable\u003c\/li\u003e\n  \u003cli\u003eEasy one-handed operation and quick installation in seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eThe Jowua MagSafe phone holder for Tesla display is the elegant solution for everyone who wants to use their smartphone safely, comfortably, and stylishly in the Tesla. Developed for Tesla Model S, Model 3, Model X, Model Y, and Cybertruck, this high-quality holder blends harmoniously into the minimalist cockpit while offering maximum functionality. Thanks to the concealable design, it discreetly disappears behind the display when not in use, ensuring a particularly tidy interior.\u003c\/p\u003e\n\u003cp\u003eDepending on your needs, the holder is available in two variants: as a version without charging function or as a particularly powerful version with Qi2 Wireless Charging and active cooling. The charging version supports magnetic wireless charging with up to 15 W for compatible iPhone and Android devices and has been specially developed for stable charging performance in the vehicle. The integrated dual cooling system with semiconductor cooling plate and quiet circulating fan helps to effectively dissipate heat and optimally regulate your smartphone's temperature while driving.\u003c\/p\u003e\n\u003cp\u003eFor perfect operating comfort, the Jowua holder can be adjusted in many ways. The rotating and extendable base, foldable metal arm, and 360° universal ball head allow precise alignment to your preferred viewing angle. This way, you always have navigation, calls, or music control optimally in view. The strong magnet holds your smartphone securely, while the non-slip silicone surface provides additional protection against slipping and scratches.\u003c\/p\u003e\n\u003cp\u003eEven during installation, the phone holder impresses with its thoughtful design. The suction cup with pressure lock ensures a strong vacuum seal without adhesive residues and can be easily removed, cleaned, and reused if necessary. This makes the Jowua MagSafe phone holder the ideal Tesla accessory for everyone who values secure hold, modern design, and intelligent technology.\u003c\/p\u003e ","brand":"Jowua","offers":[{"title":"with Qi2 wireless charging and active cooling","offer_id":54859527586060,"sku":"JW-Magsafe-Display-Wireless","price":99.99,"currency_code":"EUR","in_stock":true},{"title":"without charging","offer_id":54859527618828,"sku":"JW-Magsafe-Display","price":69.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/files\/d313b016fbad49027e45c6a25b0d88e741f0c75310a73710b464f0dae9b2c0cf.webp?v=1783522489"},{"product_id":"jowua-tragbarer-luftkompressor-mit-100-w-schnellladung-fur-alle-tesla-fahrzeuge","title":"Jowua Portable Air Compressor with 100 W Fast Charging for all Tesla Vehicles","description":"\u003cul\u003e\n  \u003cli\u003eInflates around twice as fast as comparable portable compressors\u003c\/li\u003e\n  \u003cli\u003eCharges over USB-C at up to 100 W in about 30 minutes — roughly six times faster than standard models\u003c\/li\u003e\n  \u003cli\u003eDie-cast aluminium cylinder, built for the high tyre pressures of electric vehicles\u003c\/li\u003e\n  \u003cli\u003eLarge display showing target and current pressure side by side\u003c\/li\u003e\n  \u003cli\u003eComplete in a shockproof case: needle valve and Presta adapters plus USB-C cable included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eA Tesla runs on comparatively high tyre pressure, because anything below that costs rolling resistance and therefore range. Half a bar short weighs more heavily here than on a combustion car — and it is hard to check at the petrol station you no longer drive past.\u003c\/p\u003e\n\u003cp\u003eWhich is why this Jowua compressor belongs in the boot rather than at the workshop. It inflates about twice as fast as comparable portable units, and when the battery runs down you plug it into a 100 W USB-C charger: half an hour later it is full again. That is roughly six times what standard models manage here.\u003c\/p\u003e\n\u003cp\u003eThe cylinder is die-cast aluminium and built for the higher pressures electric vehicles ask for. The large display shows target and current pressure side by side, so there is no mental arithmetic while inflating. Everything lives in a shockproof case that also holds the needle valve adapter for balls, the Presta adapter for road bikes and the USB-C cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The air hose gets hot in use — let it cool down after inflating before handling it. Do not run the compressor for more than five minutes at a stretch. The unit contains a built-in lithium battery.\u003c\/p\u003e","brand":"Jowua","offers":[{"title":"Default Title","offer_id":62089816834316,"sku":"JW-AIR-COMPRESSOR","price":89.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/files\/b5534fd18a7d0968837d417074f01f2aabfa395c7ae63f38e24bab943fde1112.png?v=1789725367"},{"product_id":"jowua-gaming-controller-carbon-mit-kabellosem-laden-fur-alle-tesla-modelle","title":"Jowua Gaming Controller Carbon with Wireless Charging for all Tesla Models","description":"\u003cul\u003e\n  \u003cli\u003eCharges wirelessly on the pad in the centre console — just put it down\u003c\/li\u003e\n  \u003cli\u003eConnects via the included 2.4 GHz dongle or over Bluetooth, for Model S, 3, X and Y\u003c\/li\u003e\n  \u003cli\u003eMulti-Device Switch: two devices paired at once, swap at the press of a button\u003c\/li\u003e\n  \u003cli\u003eDual-motor rumble, six-axis gyro sensor and auto-burst\u003c\/li\u003e\n  \u003cli\u003e600 mAh battery for around eight hours of play, full in two hours, charge and play at the same time over USB-C\u003c\/li\u003e\n  \u003cli\u003eAlso works with Nintendo Switch and Switch 2, iPad, iPhone, Android and PC, and with Steam in Model S and X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eGaming in a Tesla rarely fails because of the game. It fails because the controller has been sitting flat in the glovebox for three weeks. This one goes on the charging pad in the centre console and keeps charging there. Get in, pick it up, play.\u003c\/p\u003e\n\u003cp\u003eA 2.4 GHz dongle is included for the connection, with no input lag and no interference. Bluetooth is the alternative: Switch mode (\"S\") for the car, Xbox mode for iOS and laptops. Two Bluetooth devices can be held at once, so two controllers, or one controller plus a phone.\u003c\/p\u003e\n\u003cp\u003eIn the hand it offers what you would expect: two rumble motors, a six-axis gyro sensor for motion control and an auto-burst function. The housing is ABS, weighs 145 grams and measures 15 × 8.4 × 4.4 cm — small enough for the glovebox, a backpack or a travel bag.\u003c\/p\u003e\n\u003cp\u003eThe 600 mAh battery lasts around eight hours of play and is full again in two; on standby it holds for about 25 days. Over USB-C you can charge and play at the same time. A charging protection circuit only starts wireless charging below a certain battery level, so the cell does not suffer from sitting on the pad.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The box contains the controller in the carbon finish, a USB-A to USB-C cable and the USB dongle. In Model 3 and Model Y from 2022 the centre console USB ports carry power only, no data — put the dongle in the USB-A port in the glovebox instead. On vehicle software 25.8 Jowua recommends the supplied dongle over Bluetooth. The unit contains a built-in lithium battery.\u003c\/p\u003e","brand":"Jowua","offers":[{"title":"Default Title","offer_id":62089898131724,"sku":"JW-GAME-CONTROLLER-CARBON","price":54.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/files\/a2b99c909a06c6656aae68e4ceb2b781faa9f4ebc809062d0a5db68cefc88e1e.png?v=1789731704"},{"product_id":"jowua-set-magsafe-rucksitz-handyhalterung-2-magsafe-ringe-fur-tesla-model-s-x-3-highland-und-y-juniper","title":"Jowua MagSafe Rear Seat Phone Mount + 2 MagSafe Rings for the Tesla Model S\/X\/3\/Y","description":"\u003cul\u003e\n  \u003cli\u003eComplete set: MagSafe phone mount for the rear seats plus 2 MagSafe rings for retrofitting\u003c\/li\u003e\n  \u003cli\u003eThe rings make smartphones and cases without MagSafe compatible too\u003c\/li\u003e\n  \u003cli\u003eFits Tesla Model S, Model X, Model 3 Highland and Model Y Juniper\u003c\/li\u003e\n  \u003cli\u003eSimply insert into the hard backrest trim – without damaging the interior\u003c\/li\u003e\n  \u003cli\u003eCheaper than buying the items individually\u003c\/li\u003e\n  \u003cli\u003eNote: Not compatible with Performance models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eWith this Jowua set, passengers in the back seat of your Tesla get a dedicated place for their smartphone. The MagSafe phone mount simply slides into the hard trim of the backrest and holds the iPhone securely by magnet – ideal for videos, music or games on the road.\u003c\/p\u003e\n\u003cp\u003eThe two MagSafe rings in the set retrofit smartphones or cases without magnets, so Android devices and older iPhones also hold securely on the mount. The rings are attached once with the 3M adhesive strip.\u003c\/p\u003e","brand":"Jowua","offers":[{"title":"Default Title","offer_id":65963543986444,"sku":"JW-3YH-PHONE-HOLDER-REAR-MS-SET","price":34.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/files\/fa466006d795926e7fe61b5a26d36006a618829a37bb3fb09354ea1db2efbb14.jpg?v=1790175945"},{"product_id":"spigen-magsafe-handyhalterung-fur-die-luftung-des-tesla-model-3-highland-model-y-juniper","title":"Spigen MagSafe Phone Mount for the Tesla Model 3 Highland \/ Model Y Juniper Air Vent","description":"\u003cul\u003e\n  \u003cli\u003eMagSafe phone mount designed specifically for the air vent of the Tesla Model 3 Highland and Model Y Juniper\u003c\/li\u003e\n  \u003cli\u003e20 strong magnets hold your smartphone securely, even on bumpy roads\u003c\/li\u003e\n  \u003cli\u003eInstalls in seconds, without tools or adhesive\u003c\/li\u003e\n  \u003cli\u003eSlides and rotates for the right viewing angle\u003c\/li\u003e\n  \u003cli\u003eMatte black design with a soft silicone surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eThe Spigen MagSafe mount TAM100 is made for the continuous air vent slot in the dashboard of the Tesla Model 3 Highland and Model Y Juniper. Simply slide it into the vent slot and it holds firmly without tools or adhesive tape. Your smartphone stays in view without covering the Tesla's screen.\u003c\/p\u003e\n\u003cp\u003e20 built-in magnets reliably hold MagSafe-compatible iPhones and phones with a MagSafe case or metal ring, even on cobblestones and in corners. The mount slides sideways and rotates, so navigation or music is always easy to read. The soft silicone surface protects your smartphone and interior from scratches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e With carbon-look interior trims, press the mount in a little more firmly so it sits securely. The mount does not charge.\u003c\/p\u003e\n\u003ch6\u003eCompatibility\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eTesla Model 3 Highland (2024–2026), Standard and Premium\u003c\/li\u003e\n  \u003cli\u003eTesla Model Y Juniper (2025–2026), Standard and Premium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the Performance versions of Model 3 Highland and Model Y Juniper or with older Model 3 and Model Y.\u003c\/p\u003e\n\u003ch6\u003ePackage contents\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × Spigen MagSafe Vent Mount TAM100\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spigen","offers":[{"title":"Default Title","offer_id":66036668236044,"sku":"SPI-3YH-AIRVENT-MAGSAFE","price":29.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/files\/86248338157a604ec34697b623ab11860c0d9d6c5079610843f283b6188a796b.jpg?v=1792747688"},{"product_id":"mobile-origin-usb-c-auf-usb-c-ladekabel-60-w-1-m","title":"Mobile Origin USB-C to USB-C Charging Cable 60 W, 1 m","description":"\u003cul\u003e\n  \u003cli\u003eUSB-C to USB-C charging cable with 60 W Power Delivery and 1 m length\u003c\/li\u003e\n  \u003cli\u003eMagnetic: flat cable with built-in magnets that neatly coils itself up\u003c\/li\u003e\n  \u003cli\u003eNon-magnetic: ultra-thin cable with 3.2 mm diameter and flat connector\u003c\/li\u003e\n  \u003cli\u003eData transfer at up to 480 Mbit\/s (USB 2.0)\u003c\/li\u003e\n  \u003cli\u003eDurable braided jacket in black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eA good USB-C cable belongs in every car, whether for charging your smartphone at the centre console or for your tablet and laptop on the go. Both versions charge at up to 60 W via USB Power Delivery and transfer data at up to 480 Mbit\/s.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMagnetic:\u003c\/strong\u003e The flat cable has magnets in its jacket, so it coils itself into a neat loop. It does not tangle and, once coiled, fits into any bag or the glovebox. The patented braided jacket is tested for 20,000 bends, 10,000 plug cycles and 30 kg of pull force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNon-magnetic:\u003c\/strong\u003e The UltraSlim cable CB11 is especially thin at 3.2 mm in diameter and weighs just 17 g. The aluminium connector, only 4.5 mm high, also fits into phone cases and tight ports.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eConnectors: USB-C to USB-C\u003c\/li\u003e\n  \u003cli\u003eCharging power: up to 60 W (USB Power Delivery)\u003c\/li\u003e\n  \u003cli\u003eData transfer: up to 480 Mbit\/s (USB 2.0)\u003c\/li\u003e\n  \u003cli\u003eLength: 1 m\u003c\/li\u003e\n  \u003cli\u003eColour: Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eIn the Box\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × USB-C to USB-C cable in the selected version\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mobile Origin","offers":[{"title":"Magnetic","offer_id":66036669448460,"sku":"MO-USBC-CABLE-60W-MAGNETIC","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Non-magnetic","offer_id":66036669481228,"sku":"MO-USBC-CABLE-60W-SLIM","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/files\/0d4ca2ca655a2c44eaa723689e27e0297026968a5909ceff59d58fbdb711ce7e.jpg?v=1792747723"},{"product_id":"mobile-origin-kfz-ladegerat-60-w-mit-usb-c-und-usb-a","title":"Mobile Origin 60 W Car Charger with USB-C and USB-A","description":"\u003cul\u003e\n  \u003cli\u003eCar charger with 60 W total output for the 12 V socket\u003c\/li\u003e\n  \u003cli\u003eTwo ports: USB-C Power Delivery 30 W and USB-A Quick Charge 3.0 30 W\u003c\/li\u003e\n  \u003cli\u003eCharges two devices at the same time\u003c\/li\u003e\n  \u003cli\u003eLED light illuminates the ports so plugging in is easy at night too\u003c\/li\u003e\n  \u003cli\u003eProtection against overheating, short circuit and overload\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eThe Mobile Origin CA2 car charger turns the 12 V socket in your car into a fast charging station for smartphones, tablets and more. It charges via USB-C with Power Delivery and via USB-A with Quick Charge 3.0, each with up to 30 W. This lets driver and passenger charge at the same time.\u003c\/p\u003e\n\u003cp\u003eA subtle LED light illuminates the ports so the cable goes in quickly even in the dark. Built-in protection circuits prevent overheating, short circuits, overload and overvoltage. The charger works with 12 V and 24 V sockets, so it fits cars, SUVs and trucks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e When both ports are used at the same time, the charging speed per device may drop.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003eInput: 12–24 V DC\u003c\/li\u003e\n  \u003cli\u003eOutputs: USB-C PD 30 W, USB-A QC 3.0 30 W\u003c\/li\u003e\n  \u003cli\u003eTotal output: 60 W\u003c\/li\u003e\n  \u003cli\u003eSupports: PD 3.0, QC 3.0, PPS, AFC, FCP\u003c\/li\u003e\n  \u003cli\u003eDimensions: 28 × 28 × 65 mm\u003c\/li\u003e\n  \u003cli\u003eMaterial: ABS and PC, colour black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eIn the box\u003c\/h6\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × CA2 car charger\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mobile Origin","offers":[{"title":"Default Title","offer_id":66036669513996,"sku":"MO-CAR-CHARGER-60W","price":12.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/files\/e0d16e5c518c1ad38a565c1d6053082fb87b8d07db571fa28dcf44375da41a6c.jpg?v=1792748580"},{"product_id":"elektronische-parkscheibe-needit-park-lite-solar-2-0-schwarz","title":"Electronic Parking Disc Needit Park Lite Solar 2.0 – Black ","description":"\u003cul\u003e\n\u003cli\u003eDimension: L x W x H 10.3 x 5.2 x 2 cm, Weight 66 g\u003c\/li\u003e\n\u003cli\u003eApproval KBA (ECE approval no. 10 R – 067203), 100% compliant with road traffic regulations\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -20 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e100% solar-powered, permanently integrated Li-Po battery 3.7 V \/ 200 mAh – no battery replacement\u003c\/li\u003e\n\u003cli\u003eOver 12 months of dark reserve – ideal for underground garages\u003c\/li\u003e\n\u003cli\u003eClock reaction time parking mode: approx. 20 sec.\u003c\/li\u003e\n\u003cli\u003eColor black\u003c\/li\u003e\n\u003cli\u003eSuitable for any vehicle\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e This electronic parking disc is only approved in Germany!\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003e\u003cb\u003eDescription\u003c\/b\u003e\u003c\/h6\u003e\n\u003cp\u003eThe Park Lite Solar 2.0 combines the proven comfort of an electronic parking disc from Needit with modern solar technology.\u003c\/p\u003e\n\u003cp\u003eActivate once – then the Park Lite Solar takes over. Time, date, and automatic rounding of the parking time are already preset. After activation, the parking disc automatically detects when the vehicle is parked and independently displays the permissible arrival time.\u003c\/p\u003e\n\u003cp\u003eYou never have to remember to set your parking disc again. This means parking tickets due to a forgotten parking disc are a thing of the past.\u003c\/p\u003e\n\u003cp\u003eBattery replacement is also unnecessary: The Park Lite Solar is powered exclusively by solar energy. The integrated battery is continuously charged via the solar cells – even behind the windshield.\u003c\/p\u003e\n\u003ch6\u003e\u003cb\u003eYour Advantages\u003c\/b\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic setting of the permissible arrival time, rounded to the next half hour\u003c\/li\u003e\n\u003cli\u003eNo battery replacement necessary\u003c\/li\u003e\n\u003cli\u003eTime and date already preset\u003c\/li\u003e\n\u003cli\u003eAutomatic summer\/winter time adjustment (can be deactivated)\u003c\/li\u003e\n\u003cli\u003eCrash-tested – secure attachment to the windshield\u003c\/li\u003e\n\u003cli\u003eApproved by the Federal Motor Transport Authority\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cb\u003eScope of Delivery\u003c\/b\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eElectronic parking disc Park Lite Solar 2.0 with integrated battery\u003c\/li\u003e\n\u003cli\u003eAdhesive pads\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cb\u003eInstallation\u003c\/b\u003e\u003c\/h6\u003e\n\u003cp\u003eAttach inside the windshield, preferably at the bottom right above the environmental badge. Do not operate while driving.\u003c\/p\u003e\n\u003cp\u003eNeedit – The Original. Approved by the Federal Motor Transport Authority since 2014.\u003c\/p\u003e ","brand":"Needit","offers":[{"title":"Default Title","offer_id":66057460252940,"sku":"NEED-PARK-LITE-SOLAR-S","price":39.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/files\/aeba7a0edb16c4f011c3ba39e8a493e8d9b9073df8e59444436f277770ff8358.png?v=1793624088"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0386\/1584\/2956\/collections\/a49d72b57d6ae44e864ddbbe69bd96736e9476acb0996f5087202b23ee217197_e13b90b2-9b5d-46af-9d6b-e28bf83f07d4.jpg?v=1792423115","url":"https:\/\/shop4tisla.com\/en\/collections\/tesla-model-y-juniper-standard-technik-laden.oembed","provider":"Shop4Tesla","version":"1.0","type":"link"}